ProEco Products EZ PRESS 2000 Pressure Filter – 18 Watt UVC
The ProEco Products EZ PRESS 2000 Pressure Filter is ideal for ponds and water gardens up to 2,000 gallons. The ProEco Products EZ PRESS 2000 Pressure Filter delivers crystal clear water with very low maintenance. It features an integrated Ultraviolet Clarifier which flocculates (clumps) any algae that passes through the filter. The flocculated algae can then be captured by the filter and removed from the pond. The “Easy Clean” feature of these filters makes maintenance a quick and easy process that can be done without getting dirty. The ProEco Products EZ PRESS 2000 Pressure Filter can be installed anywhere around a pond and can be buried right up to the lid of the filter, which makes it very easy to hide.
The ProEco Products EZ PRESS 2000 Pressure Filter provides incredible mechanical and biological filtration at a great price. The filter incorporates both fine and coarse filter foam media for optimal beneficial bacteria growth. The ProEco Products EZ PRESS 2000 Pressure Filter is easily cleaned by switching the control valve to backwash and slowly pulling the cleaning handle to compress the filter pads. Simply switch the control valve back to normal pond filtering when the filter is clean.
For best results, pair the ProEco Products EZ PRESS 2000 Pressure Filter with the ProEco Products FP 2300 Filter Pump.
As a component of the Clearwater Guarantee, the ProEco Products EZ PRESS 2000 Pressure Filter, along with a properly sized FP Filtration Pump, will guarantee that the pond or water garden will have clear water for a lifetime.
Key Features
- The ProEco Products EZ PRESS 2000 Pressure Filter provides highly effective mechanical and biological filtration
- Integrated 18 Watt UV Clarifier to keep the pond water crystal clear
- Designed to operate in combination with magnetic drive circulating pumps
- Clog indicator
- Multiple layers of filter foam in differing sizes and densities provide mechanical and biological filtration
- Convenient cleaning mechanism enables the owner to maintain the filter by using a manual flushing control at the top of the unit
- EZ Clean pull handle cleaning system – filter foam elements can be cleaned by simply turning the function knob to “Clean” and pulling up on the cleaning handle – the filter elements are squeezed, expelling the solid waste
- When cleaning the filter, a drainage hose can be connected to the cleaning outlet which diverts the dirty water away from the pond – an extra hosetail is supplied for this purpose
- Filter clamp for easy opening
- Sturdy construction
- Convenient inlet/outlet hosetails accommodate 3/4″, 1″, 1-1/4″ and 1-1/2″ tubing
- Built-in UV lamp indicator
- Function knob to easily switch between normal operation and cleaning
- The ProEco Products EZ PRESS 2000 Pressure Filter can be buried in the soil up to the lid
- Built-in temperature monitor automatically switches off the UV lamp if it overheats due to a lack of water caused by a defective pump
- 15 ft. power cord
- Schedule 40 fitting adapters and ball valve fittings included
- For best results, pair the ProEco Products EZ PRESS 2000 Pressure Filter with the ProEco Products FP 2300 Filter Pump
|
|
|
|
Warranty
- 3-year manufacturer’s limited warranty
- 1-year warranty on UV lamp
IMPORTANT
- DO NOT SUBMERSE !
- The ProEco Products EZ PRESS 2000 Pressure Filter is not approved for use in swimming pools or salt water
- DO NOT USE pressurized pond filters in combination with high-pressure waterfall pumps
- Designed for use with pumps with maximum head pressure of 16′ or less
- For best results, pair the ProEco Products EZ PRESS 2000 Pressure Filter with the ProEco Products FP 2300 Filter Pump
- To ensure maximum circulation through the filter, it is best to keep the hose short and the pumping height to a minimum, especially on the discharge side of the filter
- Maximum recommended height difference between filter lid and water outlet is 6′
- UVC MUST be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
- For safety reasons, the ProEco Products EZ PRESS 2000 Pressure Filter should be placed at least 6.5′ from the edge of the pond
Specifications
| ProEco Products Part Number | EZ PRESS 2000 |
| Maximum Pond Sizes * | 2,000 gallons (no fish) 1,000 gallons (with fish) |
| Maximum Flow Rate | 2,400 GPH |
| Maximum Pump Input Pressure | 7.25 PSI |
| Maximum Pump Head Pressure | 16 ft. |
| UV Clarifier | 18 W |
| Inlet | step-down hose adapter fits 3/4″, 1″, 1-1/4″ & 1-1/2″ kink-free tubing |
| Outlet | step-down hose adapter fits 3/4″, 1″, 1-1/4″ & 1-1/2″ kink-free tubing |
| UVC Power Cord Length | 15 ft. |
| Voltage | 120 V / 60 Hz. |
| Filter Dimensions | 15″ Dia. x 15″ H |
* All figures are based on the following assumptions: Minimum pond depth of 18 inches. Maximum flow rate shown above is circulated through the filter. Filter is operated continuously.
Pond size recommendations are approximate and are only given for general guidance. All performance data were obtained under controlled conditions. Real-world performance may vary due to local circumstances.
Replacement Parts
At PondUSA.com we carry the complete line of ProEco Products replacement parts for your ProEco Products EZ PRESS 2000 Pressure Filter. Whether you need replacement filter pads, a pressure clamp, a quartz sleeve or any other spare parts … we can help.
