ProEco Products Clear Water Pond Filtration Kit 1
The ProEco Products Clear Water Pond Filtration Kit 1 includes everything you need to effectively filter garden ponds up to 2,000 gallons. It comes complete with a ProEco Products EZ PRESS 2000 Pressure Filter with an integrated 18 Watt UV Clarifier, a ProEco Products FP 2300 Filter Pump, tubing and necessary fittings.
By installing the ProEco Products Clear Water Pond Filtration Kit 1 you are assured that your pond will have clear, clean and healthy water. ProEco Products guarantee that if you use the properly sized and maintained Clear Water Guarantee products that you will have clean and clear water in your pond. The pond water will be clear enough to see the tip of a tape measure at a depth of two feet (24″). Fish and plant load must not exceed recommended levels for the system components that are in use.
Key Features
- All components of the ProEco Products Clear Water Pond Filtration Kit 1 are properly sized and matched up for superior performance
- The ProEco Products Clear Water Pond Filtration Kit 1 includes a ProEco Products EZ PRESS 2000 Pressure Filter with an integrated 18 Watt UV Clarifier, a ProEco Products FP 2300 Filter Pump, tubing and necessary fittings
Warranty
- 3-year manufacturer’s limited warranty
IMPORTANT
- The ProEco Products Clear Water Pond Filtration Kit 1 is not approved for use in swimming pools or salt water
- To ensure maximum circulation through the filter, it is best to keep the hose short and the pumping height to a minimum, especially on the discharge side of the filter
- Must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
Specifications
ProEco Products Part Number | PROECO-CWP1 |
Maximum Pond Sizes * | 2,000 gallons (no fish) 1,000 gallons (with normal fish load) |
Pump | ProEco Products FP 2300 Filter Pump |
Pond Filter | ProEco Products EZ PRESS 2000 Pressure Filter with integrated 18 Watt UV Clarifier |
Tubing | 25 ft. of 1-1/2″ kink-free tubing |
Fittings | stainless steel hose clamps |
* All figures are based on the following assumptions: Minimum pond depth of 18 inches. Maximum flow rate shown above is circulated through the filter. Filter is operated continuously.
Pond size recommendations are approximate and are only given for general guidance. All performance data were obtained under controlled conditions. Real-world performance may vary due to local circumstances.