ProEco Products 36″ Acrylic Waterfall Weir – 36″ Spillway – FREE SHIPPING

$35.98$305.99

The ProEco Products 36″ Acrylic Waterfall Weir provides increased aeration and fantastic water sound. White, blue or color-changing LED light strips are available as an option.

$305.99
$129.59
$129.59
$190.79
$85.49
$35.98

ProEco Products 36″ Acrylic Waterfall Weir – 36″ Spillway (WA-36)

The ProEco Products 36″ Acrylic Waterfall Weir is made of durable acrylic, with increased internal support for the weir lip. The ProEco Products 36″ Acrylic Waterfall Weir creates a beautiful sheer waterfall which works best within the flow rates and heights listed below. All ProEco Products Acrylic Waterfall Weirs come with a 2-year manufacturer’s limited warranty.

The ProEco Products 36″ Acrylic Waterfall Weir provides increased aeration and fantastic water sound. White, blue or color-changing LED light strips are available as an option.

 

ProEco Products Acrylic Waterfall Weir - Installation
ProEco Products 36″ Acrylic Waterfall Weir – Installation


Key Features

  • 36″ weir opening / spillway
  • Includes one piece acrylic weir (no other parts necessary to run it without lighting except tubing coming from the water source)
  • 1-1/4″ FPT (female threaded) rear entry port
  • Top quality, heavy-duty construction
  • Fantastic water sound
  • Good for pond aeration
  • The ProEco Products 36″ Acrylic Waterfall Weir can be used indoors or out
  • White, blue or color-changing LED light strips are available as an option

 

ProEco Products Acrylic Waterfall Weir - Dimensions
ProEco Products 36″ Acrylic Waterfall Weir – Dimensions


Warranty

  • 2-year manufacturer’s limited warranty


IMPORTANT

  • For a clear sheet of water, keep the waterfall height limited to about 3 ft. above the pond water level – higher falls will cause the sheet to break up
  • The ProEco Products 36″ Acrylic Waterfall Weir may be used in chlorinated water, such as swimming pools and spas
  • LED light strip sold separately
  • Optional LED light strip transformer must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet


Specifications

ProEco Products Part Number WA-36
Waterfall Spillway Width 36″
Recommended Flow Rate 3,000 GPH
Inlet (1) 1-1/4″ FPT (female threaded)
Dimensions 36″ W x 4-3/4″ D x 3-3/8″ H

 

Accessory Products

ProEco Products LED Light Strip

ProEco Products 35″ LED Light Strip

White, with low-voltage transformer. Light output is approx. 3,000 K.

ProEco LED Light Strips can be used with either the ProEco Stainless Steel Weirs or Acrylic Weirs. Each light strip comes with a 33 ft. power cord and is protected by a 2 year limited warranty.

ProEco Products LED Light Strip

ProEco Products 35″ LED Light Stripd

Blue, with low-voltage transformer.

ProEco LED Light Strips can be used with either the ProEco Stainless Steel Weirs or Acrylic Weirs. Each light strip comes with a 33 ft. power cord and is protected by a 2 year limited warranty.

ProEco Products LED Light Strip - RGB with Remote

ProEco Products 35″ LED Light Strip

Controllable RGB, with low-voltage transformer and remote.

ProEco Color-Changing LED Light Strips can be used with either the ProEco Stainless Steel Weirs or Acrylic Weirs. These multi-colored controllable RGB (red, green, blue) units come with a remote. Each light strip comes with a 33 ft. power cord and is protected by a 2 year limited warranty.

Also available are a 5-way splitter and a 3 meter (9.8 ft.) extension cord for use with these color-changing LED light strips AFTER the controller (special four wire connections) so that multiple light strips may be run off of a single controller for synchronization.

ProEco Products Color-Changing LED Light Strips
ProEco Products Color-Changing LED Light Strips

 

You may also like…