PerformancePro Cascade C1/8-22 Low RPM Waterfall Pump – 2,100 GPH
The PerformancePro Cascade C1/8-22 Low RPM Waterfall Pump offers the perfect choice for flooded suction systems, providing reliable operation and sleek design. Constructed of corrosion resistant composite and stainless steel materials that are built to last. Featuring 1.5″ intake and discharge ports in an efficient pump that is easy to install and maintain.
Key Features
- Energy efficient, durable and reliable design for continuous operation
- All units feature efficient, industry leading motors for long term reliability
- Adjustable performance with impeller interchangeability options
- Designed to operate at any point on specified performance curve
- Long life, corrosion resistant, 316 series stainless steel shaft seals
- Corrosion resistant pump housing
- External pump design helps protect your investment from electrical hazards
- Oil free motor
- 1.5″ female NPT suction and discharge ports
- Optional 1.5″ unions available
- Optional salt water kit available
- Optional 16 AWG, 8 ft.power cord with 115 V plug available
- Optional strainer pot / priming pot available (required for non-flooded suction applications)
- Made with care in the USA
Warranty
- 3-year manufacturer’s limited warranty (fresh water applications)
- 1-year manufacturer’s limited warranty (salt water applications)
IMPORTANT
- DO NOT SUBMERSE !
- The PerformancePro Cascade C1/8-22 Low RPM Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
- Pumps supplied without power cord must be hard-wired to a GFCI-protected circuit by a licensed electrician
- The PerformancePro Cascade C1/8-22 Low RPM Waterfall Pump is not approved for use in salt water (a salt water kit is available separately)
- The PerformancePro Cascade C1/8-22 Low RPM Waterfall Pump is intended for flooded suction systems – a strainer pot / priming pot is required for non-flooded suction applications (available separately)
Specifications
PerformancePro Part Numbers | C1/8-22 | C1/8-22-C |
HP | 1/8 | 1/8 |
RPM | 1,725 | 1,725 |
Maximum Flow Rate | 2,100 GPH @ 2 ft. | 2,100 GPH @ 2 ft. |
Maximum Head | 16 ft. | 16 ft. |
Maximum Power Consumption | 144 W | 144 W |
Power Consumption @ Max. Head | 121 W @ 16 ft. | 121 W @ 16 ft. |
Power Consumption @ Max. Flow | 124 W @ 2,100 GPH @ 2 ft. | 124 W @ 2,100 GPH @ 2 ft. |
Suction Port | 1-1/2″ FPT (female threaded) | 1-1/2″ FPT (female threaded) |
Discharge Port | 1-1/2″ FPT (female threaded) | 1-1/2″ FPT (female threaded) |
Power Cord Length | n/a | 8 ft. |
Voltage | 115 V, 60 Hz. 230 V, 50 Hz. |
115 V, 60 Hz. 230 V, 50 Hz. |
Accessory Products
ProTect (MPC-10) instant protection for your pump and motor made of UV resistant thermoplastic, insulated with retardant foam for noise abatement assembly is easy and requires no tools |
|
Saltwater Kit (SWKIT) includes PVC shaft sleeve and Monel w/ SiC seal installed in pump |
|
Strainer Pot / Priming Pot – 1.5″ (MPP-10)
|
|
Union Fitting – 1.5″ (MPF-215)
|