PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump – 7,140 GPH

The PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump is the perfect choice for high efficiency and reliability, combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene, the PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump is ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot’s large basket.

Key Features

• Money-saving high efficiency pump and motor unit
• The PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump is designed to operate anywhere on its performance curve
• Long-life corrosion resistant 316 stainless steel shaft seals
• Top-of-the-line US motors
• Both pump end and motors are designed for quiet operation
• A 12 AWG, 8 ft. power cord with 115 V plug is optional
• A salt water kit is available separately
• 5 GPM minimum recommended continuous flow rate

Warranty

• 3-year manufacturer’s limited warranty (fresh water applications)
• 1-year manufacturer’s limited warranty (salt water applications)

IMPORTANT

• DO NOT SUBMERSE !
• The PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
• Pumps supplied without power cord must be hard-wired to a GFCI-protected circuit by a licensed electrician
• The PerformancePro Artesian 2 A2-3/4-HH High Head Waterfall Pump is not approved for use in swimming pools or salt water (a salt water kit is available separately)

Specifications

PerformancePro Part Numbers	A2-3/4-HH	A2-3/4-HH-C
HP	3/4	3/4
RPM	3,450	3,450
Maximum Flow Rate	7,140 GPH @ 8 ft.	7,140 GPH @ 8 ft.
Maximum Head	70 ft.	70 ft.
Maximum Power Consumption	1,250 W / 5.6 A	1,250 W / 5.6 A
Amps @ 230 V @ Max. Head	3.2 A @ 70 ft.	3.2 A @ 70 ft.
Amps @ 230 V @ Max. Flow	4.2 A @ 7,140 GPH @ 8 ft.	4.2 A @ 7,140 GPH @ 8 ft.
Discharge	2″ FPT (female threaded)	2″ FPT (female threaded)
Power Cord Length	n/a	8 ft.
Voltage	115 V, 60 Hz. 208 – 230 V, 60 Hz.	115 V, 60 Hz. 208 – 230 V, 60 Hz.

 

Accessory Products

	ProTect (MPC-10) instant protection for your pump and motor made of UV resistant thermoplastic, insulated with retardant foam for noise abatement assembly is easy and requires no tools
	Saltwater Kit (SWKIT) includes PVC shaft sleeve and Monel w/ SiC seal installed in pump
	High Volume Centrifugal Pump Intake Filter – 3″ (PIF3) Intake screen for high volume applications Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds Made from epoxy-coated heavy gauge galvanized wire Will not rust or corrode Mesh size is 1/2″ x 1″ Included PVC swing check valve keeps your pump primed 3″ connection Suitable for maximum flow rate of 13,500 GPH Measures 11″ dia. x 30″ L
	High Volume Centrifugal Pump Intake Filter – 4″ (PIF4) Intake screen for high volume applications Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds Made from epoxy-coated heavy gauge galvanized wire Will not rust or corrode Mesh size is 1/2″ x 1″ Included PVC swing check valve keeps your pump primed 4″ connection Suitable for maximum flow rate of 21,000 GPH Measures 11″ dia. x 30″ L