PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump – 7,560 GPH
The PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump is the perfect choice for high efficiency and reliability, combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene, the PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump is ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot’s large basket.
Key Features
- Money-saving high efficiency pump and motor unit
- The PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump is designed to operate anywhere on its performance curve
- Long-life corrosion resistant 316 stainless steel shaft seals
- Top-of-the-line US motors
- Motor is totally enclosed for excellent protection and long-term reliability
- Both pump end and motors are designed for quiet operation
- A 16 AWG, 8 ft. power cord with 115 V plug is optional
- A salt water kit is available separately
- 5 GPM minimum recommended continuous flow rate
Warranty
- 3-year manufacturer’s limited warranty (fresh water applications)
- 1-year manufacturer’s limited warranty (salt water applications)
IMPORTANT
- DO NOT SUBMERSE !
- The PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
- Pumps supplied without power cord must be hard-wired to a GFCI-protected circuit by a licensed electrician
- The PerformancePro Artesian 2 A2-1/2-76 Low RPM Waterfall Pump is not approved for use in salt water (a salt water kit is available separately)
Specifications
PerformancePro Part Numbers | A2-1/2-76 | A2-1/2-76-C |
HP | 1/2 | 1/2 |
RPM | 1,725 | 1,725 |
Maximum Flow Rate | 7,560 GPH @ 8 ft. | 7,560 GPH @ 8 ft. |
Maximum Head | 26 ft. | 26 ft. |
Maximum Power Consumption | 630 W | 630 W |
Power Consumption @ Max. Head | 260 W @ 26 ft. | 260 W @ 26 ft. |
Power Consumption @ Max. Flow | 630W @ 7,560 GPH @ 8 ft. | 630W @ 7,560 GPH @ 8 ft. |
Discharge | 2″ FPT (female threaded) | 2″ FPT (female threaded) |
Power Cord Length | n/a | 8 ft. |
Voltage | 115 V, 60 Hz. 230 V, 50 Hz. |
115 V, 60 Hz. 230 V, 50 Hz. |
Accessory Products
ProTect (MPC-10) instant protection for your pump and motor made of UV resistant thermoplastic, insulated with retardant foam for noise abatement assembly is easy and requires no tools |
|
Saltwater Kit (SWKIT) includes PVC shaft sleeve and Monel w/ SiC seal installed in pump |
|
High Volume Centrifugal Pump Intake Filter – 3″ (PIF3)
|
|
High Volume Centrifugal Pump Intake Filter – 4″ (PIF4)
|