PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump – 11,400 GPH
The PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is the perfect choice for high efficiency and reliability, combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene, the PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot’s large basket.
Key Features
- Money-saving high efficiency pump and motor unit
- The PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is designed to operate anywhere on its performance curve
- Long-life corrosion resistant 316 stainless steel shaft seals
- Top-of-the-line US motors
- Both pump end and motors are designed for quiet operation
- The PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is supplied without power cord
- A salt water kit is available separately
- 5 GPM minimum recommended continuous flow rate
Warranty
- 3-year manufacturer’s limited warranty (fresh water applications)
- 1-year manufacturer’s limited warranty (salt water applications)
IMPORTANT
- DO NOT SUBMERSE !
- The PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is supplied without power cord and must be hard-wired to a GFCI-protected circuit by a licensed electrician
- The PerformancePro Artesian 2 A2-1 1/2-HF High Flow Waterfall Pump is not approved for use in swimming pools or salt water (a salt water kit is available separately)
Specifications
PerformancePro Part Number | A2-1 1/2-HF |
HP | 1-1/2 |
RPM | 3,450 |
Maximum Flow Rate | 11,400 GPH @ 17 ft. |
Maximum Head | 54 ft. |
Maximum Power Consumption | 1,940 W / 9.0 A |
Amps @ 230 V @ Max. Head | 5.9 A @ 54 ft. |
Amps @ 230 V @ Max. Flow | 8.4 A @ 11,400 GPH @ 17 ft. |
Discharge | 2″ FPT (female threaded) |
Power Cord Length | n/a |
Voltage | 208 – 230 V, 60 Hz. |
Accessory Products
ProTect (MPC-10) instant protection for your pump and motor made of UV resistant thermoplastic, insulated with retardant foam for noise abatement assembly is easy and requires no tools |
|
Saltwater Kit (SWKIT) includes PVC shaft sleeve and Monel w/ SiC seal installed in pump |
|
High Volume Centrifugal Pump Intake Filter – 3″ (PIF3)
|
|
High Volume Centrifugal Pump Intake Filter – 4″ (PIF4)
|