MDM ValuFlo 750 4200VAF12 Waterfall Pump – 4,200 GPH
The compact MDM ValuFlo 750 4200VAF12 Waterfall Pump delivers big flow for little power. It is a great choice for smaller and simple ponds of 3,000 gallons or less. The motor is totally enclosed and fan-cooled for durability.
Key Features
- Less than half the Watt draw of comparable submersible pumps
- 2″ FPT (female threaded) suction port
- 1.5″ FPT (female threaded) discharge port
- The MDM ValuFlo 750 4200VAF12 Waterfall Pump comes pre-wired with an 8 ft. power cord and molded 115 V plug
- Made in USA
- The MDM ValuFlo 750 4200VAF12 Waterfall Pump is suitable for waterfalls and water courses
Warranty
- 18-month manufacturer’s limited warranty
- Special Warranty Information for MDM ValuFlo Pumps
Due to the technical nature of these pumps, the pump must be returned and inspected BEFORE the warranty can be honored – we will assist you with the claim but you may be required to ship your pump to the manufacturer for warranty service
IMPORTANT
- DO NOT SUBMERSE !
- The MDM ValuFlo 750 4200VAF12 Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The MDM ValuFlo 750 4200VAF12 Waterfall Pump is not approved for use in swimming pools or salt water
- The MDM ValuFlo 750 4200VAF12 Waterfall Pump is not a suction pump – a priming pot is required (sold separately)
Specifications
MDM Part Number | 4200VAF12 |
Maximum Flow Rate | 4,200 GPH |
Maximum Head | 12 ft. |
Power Consumption | 166 W / 1.5 A |
Suction | 2″ FPT (female threaded) |
Discharge | 1.5″ FPT (female threaded) |
Power Cord Length | 8 ft. |
Voltage | 115 V, 60 Hz. |
Accessory Products
Priming Pot / Basket Strainer 90 C.I. with clear easy-lock lid |
|
High Volume Centrifugal Pump Intake Filter – 3″ (PIF3)
|