MDM ValuFlo 1000 4500VAF21 Waterfall Pump – 4,500 GPH

The MDM ValuFlo 1000 4500VAF21 Waterfall Pump has set the standard by which all others are measured. Perfect blend of medium pressure and ample flow for the majority of ponds. Motor is totally enclosed and fan-cooled for durability.

Key Features

• Less than half the Watt draw of comparable submersible pumps
• 1.5″ FPT (female threaded) suction port
• 1.5″ FPT (female threaded) discharge port
• The MDM ValuFlo 1000 4500VAF21 Waterfall Pump comes pre-wired with an 8 ft. power cord and molded 115 V plug
• Can be wired for 230 V
• Made in USA
• The MDM ValuFlo 1000 4500VAF21 Waterfall Pump is suitable for waterfalls and water courses

Warranty

• 18-month manufacturer’s limited warranty
• Special Warranty Information for MDM ValuFlo Pumps
  Due to the technical nature of these pumps, the pump must be returned and inspected BEFORE the warranty can be honored – we will assist you with the claim but you may be required to ship your pump to the manufacturer for warranty service

IMPORTANT

• DO NOT SUBMERSE !
• The MDM ValuFlo 1000 4500VAF21 Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
• Pumps wired for 230 V must be hard-wired to a GFCI-protected circuit by a licensed electrician
• The MDM ValuFlo 1000 4500VAF21 Waterfall Pump is not approved for use in swimming pools or salt water
• The MDM ValuFlo 1000 4500VAF21 Waterfall Pump is not a suction pump – a priming pot is required (sold separately)

Specifications

MDM Part Number	4500VAF21
Maximum Flow Rate	4,500 GPH
Maximum Head	21 ft.
Power Consumption	253 W / 2.2 A
Suction	1-1/2″ FPT (female threaded)
Discharge	1-1/2″ FPT (female threaded)
Power Cord Length	8 ft. (115 V)
Voltage	115 V, 60 Hz. 230 V, 60 Hz.

 

Accessory Products

Priming Pot / Basket Strainer 90 C.I. with clear easy-lock lid 1.5″ FPT / 1.5″ buttress inlet x 1.5″ union flange outlet includes adapters to mate with MDM ValuFlo Pumps

High Volume Centrifugal Pump Intake Filter – 3″ (PIF3) Intake screen for high volume applications Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds Made from epoxy-coated heavy gauge galvanized wire Will not rust or corrode Mesh size is 1/2″ x 1″ Included PVC swing check valve keeps your pump primed 3″ connection Suitable for maximum flow rate of 13,500 GPH Measures 11″ dia. x 30″ L