Kasco 4400JF 1 HP Floating Fountain
The Kasco 4400JF Floating Aerating Fountain is perfect for medium size ponds up to 1/2 acre in size and when multiple fountain patterns and pattern heights are desired. It includes 5 interchangeable nozzles standard, patterns range in height and width and provide beautiful and stunning displays with up to 10′ in height.
The 5 fountain patterns range from 4 ft. in height to 27 ft. in diameter. With 5 multiple fountain patterns, you have the freedom to adjust the aerating fountain to fit your pond, weather conditions, and your tastes.
The Kasco 4400JF Floating Aerating Fountain comes with two mooring ropes and a choice of 50 ft., 100 ft., 150 ft. or 200 ft. power cord. Lights are available separately.
The Kasco 4400JF Floating Aerating Fountain includes a GFCI protected control box. The C-25, 120 Volt control box with timer, GFCI protection, and photo eye for light operation comes standard. The photo eye allows you to set your timer for the hours of operation and when it is dark the lights (light sets sold separately) will activate. No electrician is required to install the C-25 Control or the Kasco 4400JF Floating Aerating Fountain if an existing 120 V, 15 Amp receptacle is available.
|
|
|
|
|
|
|
|
|
Key Features
- Multiple Patterns in One Unit: Custom-configure the unit to the exact project needs and your personal tastes.
- Efficient / Low Power Use: Highest efficiency design for low power consumption versus competing units. Reduces operating costs over the entire life of the unit. 11 running Amps on 120 Volt circuit for low operating costs.
- Clog Resistant: Unique water-deflecting nozzle design gives you the most clog-resistant model on the market. Successful shallow water operation in as little as 19″.
- Rugged Motor: Environmentally friendly design with a hard-face internal mechanical seal for protection against leaks. Long-life top and bottom ball bearings. Flood oil lubricated for excellent heat dissipation.
- Corrosion Resistant: Superior dependability in salt water or other corrosive environments. All external metal motor, float, and hardware components are of stainless steel composition and protected by a sacrificial zinc anode.
- Low Maintenance: Clean the motor housing once or twice per year and replacing the sacrificial zinc anode when visibly corroded.
- Fully Tested: ETL listed to stringent UL and CSA Safety Standards.
- Ships Easily: The Kasco 4400JF Floating Aerating Fountain ships in 2 or 3 boxes, depending upon cord length selected (add 1 box for lights).
- Dependable: Backed by a two-year warranty
- Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50′, 100′, 150′, or 200′.
- Includes two 50′ braided nylon mooring ropes.
- Made in the U.S.A.
Warranty
- 2-year manufacturer’s limited warranty
IMPORTANT
- The Kasco 4400JF 1 HP Floating Fountain is not approved for use in swimming pools
- Must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
Specifications
| Kasco Marine Part Number | 4400JF |
| Motor | 1 HP |
| Pond Size | 1/2 acre |
| Amperage | 11 Amps |
| Minimum Water Depth Required | 19″ |
| Power Cord Lengths | 50 ft., 100 ft., 150 ft. or 200 ft. |
| Weight | 84 lbs. (with 50 ft. power cord) |
| Voltage | 120 V, 60 Hz. |
Downloads
PDF File: Kasco Marine 4400JF Owners Manual
