Kasco 2.3A 2 HP Surface Aerator – 208/240 V 3-Phase
Introduce more oxygen faster with the Kasco 2.3A 2 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The Kasco 2.3A 2 HP Surface Aerator can operate in as little as 20 inches of water. It is ideal for ponds/tanks with surface areas of about 2 acres.
The Kasco 2.3A 2 HP Surface Aerator does not include a float or bottom screen. For floating units please select from the list below.
The Kasco 2.3A 2 HP Surface Aerator is available in a 208/240 Volt (60 Hz) 3-Phase model. An optional control panel is also available.
Key Features
- The Kasco 2.3A 2 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
- Low maintenance and dependable design.
- The Kasco 2.3A 2 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
- The Kasco 2.3A 2 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
- An easily replaced protective sacrificial zinc anode is included with each unit.
- Safety Tested: ETL listed to UL and CSA Standards.
- The Kasco 2.3A 2 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
- The Kasco 2.3A 2 HP Surface Aerator only requires a 20″ operating depth.
- Choice of Cord Lengths: SJTOW underwater rated power cord length options of 50′, 100′, 150′, 200′, 250′, 300′ or 400′.
- Made in the U.S.A.
Warranty
- 3-year manufacturer’s limited warranty
IMPORTANT
- The Kasco 2.3A 2 HP Surface Aerator is not approved for use in swimming pools
- Kasco recommends a licensed electrician to install the control panel and the surface aerator
- No one should ever enter the water with electrical equipment in operation or even plugged into the control panel or outlet
- It is essential that the GFCI breaker is tested once a month to ensure proper operation
Specifications
Kasco Marine Part Number | 2.3A |
Motor | 2 HP |
Pond Size | 2 acres |
Amperage | 4.5 Amps |
Minimum Water Depth Required | 20″ |
Power Cord Lengths | 50 ft., 100 ft., 150 ft., 200 ft., 250 ft., 300 ft. or 400 ft. |
Weight | 99 to 248 lbs. (depending on power cord length) |
Float Included | no |
Control Panel Included | no, must be ordered separately |
Bottom Screen Included | no |
Voltage | 208/240 V, 60 Hz. 3-Phase |
Accessory Products
Kasco CA-3235 Control Panel (CA-3235) The CA-3235 offers a single 24-hour timer in a GFCI protected 3-208/phase control panel. This UL-508A listed non-metallic 4x/3r panel has a 30ma trip level GFCl, a motor starter with adjustable overload, lightning/surge protection, and a Hand-Off-Auto switch.
|
Downloads
PDF File: Kasco AF Series Surface Aerators – Owners & Assembly Manual