Hakko HK 40L Pond Air Pump Kit (AKIT3000)
The Hakko HK 40L Pond Air Pump Kit helps improve water circulation and increase the oxygen content in your pond. It includes a Hakko HK 40L Pond Air Pump, weighted air tubing, air stones and a faux rock cover.
Key Features
- The Hakko HK 40L Pond Air Pump Kit features silent operation
- Long life expectancy
- Simple maintenance
- Low power consumption
- The Hakko HK 40L Pond Air Pump Kit includes a high efficiency Hakko air pump
- Oil free
Warranty
- 3-year manufacturer’s limited warranty
IMPORTANT
- Watch for possible condensation buildup in the air tubing
- Must be installed a minimum of 12 inches above pond water level to prevent water from flowing back
- DO NOT SUBMERSE AIR PUMP !
- The Hakko HK 40L Pond Air Pump Kit must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
- The Hakko HK 40L Pond Air Pump Kit is not approved for use in swimming pools or salt water
Specifications
Hakko Part Number | AKIT3000 |
Pond Size | up to 3,000 gallons |
Pond Depth | up to 8 ft. |
Maximum Air Flow Rate | 2.5 CFM |
Submersible | no |
Number of Outlets | 1 |
Wattage | 40 W |
Voltage | 120 V / 60 Hz. |
Power Cord Length | 6 ft. |
Air Pump Dimensions | |
Air Stones | (2) 9″ Alumina air stones |
Length of Airline | (1) 20 ft. roll of 3/8″ weighted air tubing |
Replacement Parts
If you notice that your air pump is losing air pressure or simply doesn’t work as well as when you purchased it, a simple and inexpensive diaphragm kit is available. After installing the diaphragm kit your Hakko HK 40L Pond Air Pump should be as good as new.