Firestone QuickPrime Plus – HazMat SHIPPING – EXTRA SHIPPING CHARGES APPLY

$45.99$126.99

Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard 45 mil EPDM Pond Liners prior to seaming.

$45.99
$126.99

Firestone QuickPrime Plus

Firestone QuickPrime Plus is designed to clean and prime Firestone PondGard 45 mil EPDM Pond Liners prior to the application of:

  • QuickSeam Cover Strip
  • QuickSeam Splice Tape
  • QuickSeam FormFlash
  • QuickSeam Pipe Flashing
  • QuickSeam Joint Covers
  • QuickSeam Corner Flashing

Firestone QuickPrime Plus may also be used to clean EPDM Pond Liner prior to the application of Firestone Splice Adhesive.


Method of Application

EPDM Pond Liner and other surfaces to be primed must be clean, dry, free of foreign materials and excess dusting agent. Clean with broom or rags if necessary.

Stir Firestone QuickPrime Plus thoroughly before and during use. Firestone QuickPrime Plus must be applied with a QuickScrubber or QuickScrubber Plus pad and handle using long back and forth strokes with moderate-to-heavy pressure along the length of the area until surfaces become gray in color with no streaking or puddling. Allow Firestone QuickPrime Plus to flash off completely according to the touch-push test (usually less than 10 minutes, flash off time will vary depending on ambient air conditions) before applying QuickSeam products or Lap Sealant. Complete QuickSeam product or Lap Sealant application in accordance with Firestone Specialty Products specifications and details.


Coverage Rate

Firestone QuickPrime Plus covers approximately 50-100 square feet per gallon one side. Coverage rates for various Firestone seaming products are as follows:

  • 3″ QuickSeam Seam Tape: 100-150 linear feet/gallon
  • 6″ QuickSeam Cover Tape: 100-150 linear feet/gallon
  • 9″ QuickSeam Tape: 50-100 linear feet/gallon


IMPORTANT

  • This product requires HazMat (Hazardous Materials) shipping. Extra shipping charges will apply depending on your shipping destination. We will contact you before processing your order. It cannot be shipped UPS Next-Day Air, Second-Day Air or Three-Day Select.


Downloads

PDF File: Seaming Firestone PondGard EPDM Pond Liners – Creating a Seam with Firestone 3″ Quickseam Splice Tape

PDF File: Seaming Firestone PondGard  EPDM Pond Liners – Creating a Seam with Firestone 6″ Quickseam Cover Strip Tape

PDF File: Repairing Firestone PondGard EPDM Pond Liners – Installing a Repair Patch Using a Firestone PondGard EPDM Pond Liner Repair Kit

PDF File: Sealing Pipe Penetrations through Firestone PondGard EPDM Pond Liners – Installing a Firestone Quickseam Pre-Molded Pipe Boot

PDF File: Sealing Large Pipe Penetrations through Firestone PondGard EPDM Pond Liners – Fitting Firestone PondGard EPDM Pond Liner Panels Around Pipes Using Firestone FormFlash

PDF File: Continuing Firestone PondGard EPDM Tape Seams with Multiple Tape Rolls – Priming Firestone Cover Strip Tape or Firestone 3″ Splice Tape for Continuation to the Next Roll

PDF File: Making Good Pond Liner Seams with 6″ Quickseam Cover Strip – Removing a “Fish Mouth” Gap From a Firestone Quickseam Cover Strip

PDF File: Making Good Pond Liner Seams with 6″ Quickseam Cover Strip – Removing an Air Bubble from a Firestone Quickseam Cover Strip Seam