Atlantic Water Gardens Copper Finish Mantova Wall Spout (WSCM-S)
The Atlantic Water Gardens Copper Finish Mantova Wall Spout adds old world charm with a modern twist. This heavy-duty fixture features a rich copper finish that evokes the past while fitting in perfectly with contemporary walls and patios.
Adding the dimension of light to the Atlantic Water Gardens Copper Finish Mantova Wall Spout is easy. These unique fixtures install inside the plumbing and light the water flowing past them. LED Spout Lights are available in your choice of Warm White and Color Changing. Installing a 1-1/2” tee with a 1-1/2” x 1” threaded bushing on the back side of the wall enables the Spout Light to illuminate the water leaving the spout from within the fixture. The Color Changing Spout Light can be synchronized with any other Color Changing light or Colorfalls. Color Changing lights are now controllable wirelessly via mobile application. No remote necessary.
The new InfiColor Smart Module and mobile app (sold separately) allow users to program custom color sequences and transitions, set sequence timing and daily scheduling and unlock all RGB options on any Apple® or Android™ mobile device. The Inficolor Smart Module at the heart of the system individually controls up to three zones and is backwards compatible, to work with all Atlantic Color Changing Lighting, past and present, with a simple included adapter.
The number of colors that can be generated by the combination of the 256 levels of red, green and blue are 256 x 256 x 256 = 16,777,216. So in actuality, you have unlimited control of 16.77 million colors with the new Atlantic Lighting System.
PondUSA.com is an Atlantic Water Gardens Approved Reseller
Atlantic Water Gardens Copper Finish Mantova Wall Spout
Atlantic Water Gardens Copper Finish Mantova Wall Spout (shown with optional Atlantic Water Gardens Color Changing LED Wall Spout Light)
Key Features
Solid fixture with a rich copper finish
1-1/2″ inlet for smooth water flow
Integrated drip edge to eliminate backflow down the wall
The Atlantic Water Gardens Copper Finish Mantova Wall Spout includes a grounding log for bonded systems
Warranty
3-year manufacturer’s limited warranty
IMPORTANT
The Atlantic Water Gardens Copper Finish Mantova Wall Spout is not for use with chlorinated water or swimming pools
Specifications
Atlantic Water Gardens Part Number
WSCM-S
Recommended Flow Rate
600 GPH
Projection
14-16″ @ 18″ H & 600 GPH
Inlet
(1) 1-1/2″ FPT (female threaded)
Dimensions
5″ W x 4-3/4″ D x 5″ H
Accessory Products
Atlantic Water Gardens White LED Wall Spout Light (WWSL2)
Atlantic Water Gardens LED Spout Lights feature an additional in-line disconnect for the LED driver so the wire can be fed through an electrical conduit. For best results use a minimum 1” conduit for all lighting projects. Atlantic Water Gardens LED Spout Lights are designed to work in formal Wall Spout applications but are also ideal to illuminate the flow from cored boulders. Use a minimum 1” threaded tee at the bottom of the boulder for best results.
LED Spout Lights illuminate water flowing from wall spouts and bubbling boulders
Atlantic Water Gardens Spout Light with 1″ MIPT machined brass body mounts inside Sch. 40 PVC FIPT fittings to light the stream of water from inside plumbing
Small diameter drivers are isolated 18″ from light for optimal heat dissipation and fit through 1″ conduit
LED units inside lights are easily replaceable
Warm White matches 2800° Kelvin temperature of halogen and incandescent lighting
Spout Lights feature 20′ power cord and quick-connect plug for easy installation
Flat 2-wire cord on Warm White can be stripped and tied into existing systems
Atlantic Water Gardens Part #: WWSL2
Input Voltage: 12 Volt AC
Power Consumption: 2 W
Beam Angle: 45 degrees
Power Cord Length: 20 ft.
Thread Size: 1″ MPT (male threaded)
Warranty: 5-year manufacturer’s limited warranty
Dimensions: 1-1/2″ L x 1-1/2″ W x 1-5/8″ H
Requires Atlantic Water Gardens Compact LED 30 Watt Transformer (WW30X4)
Atlantic Water Gardens LED 30 Watt Transformer (WW30X4)
Install more lights in your pond and only use one electrical outlet.
The Atlantic Water Gardens LED 30 Watt Transformer includes a 4-outlet block splitter that connects up to 4 Atlantic Warm White LED compact spotlights, hardscape lights, fountain lights, ring lights, spout lights or bar lights. The transformer converts the 120 Volts of electricity to 12 Volts which allows the pond lights to be installed safely into any water feature.
To be used with Atlantic Water Gardens Warm White LED lights only. Not compatible with Color Changing LED lighting or Colorfalls.
Simplifies connections and mounts on flat surfaces to neaten and organize wiring
Splitter features removable weatherproof caps for unused outlets
30 watt solid state transformer is fully weatherproof for worry-free external installations
Add additional splitters (not included) to power up to 30 watts of Warm White lighting
Atlantic Water Gardens LED Lighting 20 Ft. Extension Cord (WWEXT20)
Extend your Atlantic Water Gardens LED Lights up to 20 ft. with the Atlantic Water Gardens LED Lighting 20 Ft. Extension Cord.
To be used with Atlantic Water Gardens Warm White LED lights only. Not compatible with Color Changing LED lighting or Colorfalls.
Extension cords allow remote placement of lights where needed most in the landscape, waterscape and hardscape
Atlantic’s extensions feature silicone gaskets and dielectric grease for secure waterproof connections
Warm White extension cord can be stripped and spliced into existing low voltage systems
Atlantic Water Gardens LED Lighting 4-Outlet Block Splitter (WWBSX4)
The Atlantic Water Gardens LED Lighting 4-Outlet Block Splitter enables a single transformer to power up to four light fixtures. Includes weatherproof caps.
To be used with Atlantic Water Gardens Warm White LED lights only. Not compatible with Color Changing LED lighting or Colorfalls.
Atlantic quick-connect wiring makes connecting multiple fixtures fast and easy
Compact inline 4-outlet block splitters simplify connections and mount on flat surfaces to neaten and organize wiring
All splitters feature removable weather-proof caps for unused outlets
Warm White splitter can be stripped and spliced into existing low voltage systems
Atlantic Water Gardens Color Changing LED Wall Spout Light (CCSL2)
Atlantic Water Gardens LED Spout Lights feature an additional in-line disconnect for the LED driver so the wire can be fed through an electrical conduit. For best results use a minimum 1” conduit for all lighting projects. Atlantic Water Gardens LED Spout Lights are designed to work in formal Wall Spout applications but are also ideal to illuminate the flow from cored boulders. Use a minimum 1” threaded tee at the bottom of the boulder for best results.
LED Spout Lights illuminate water flowing from wall spouts and bubbling boulders
Atlantic Water Gardens Spout Light with 1″ MIPT machined brass body mounts inside Sch. 40 PVC FIPT fittings to light the stream of water from inside plumbing
Small diameter drivers are isolated 18″ from light for optimal heat dissipation and fit through 1″ conduit
LED units inside lights are easily replaceable
Spout Lights feature 20′ power cord and quick-connect plug for easy installation
InfiColor Smart Module and App (not included) unlock the full potential of Color Changing lights
New color changing lights connect to older Atlantic SOL Lighting with included plug adapter
Atlantic Water Gardens Part #: CCSL2
Input Voltage: 12 Volt DC
Power Consumption: 2 W
Beam Angle: 45 degrees
Power Cord Length: 20 ft.
Thread Size: 1″ MPT (male threaded)
Warranty: 5-year manufacturer’s limited warranty
Dimensions: 1-1/2″ L x 1-1/2″ W x 1-5/8″ H
Requires Atlantic Water Gardens Color Changing LED InFiColor Smart Module with 30 Watt Transformer (CCSM30X3)
Atlantic Water Gardens Color Changing LED InFiColor Smart Module with 30 Watt Transformer (CCSM30X3)
Color changing lights are now controllable wirelessly via mobile application. No remote necessary. The new InfiColor Smart Module and mobile app allow users to program custom color sequences and transitions, set sequence timing and daily scheduling and unlock all RGB options on any Apple® or Android™ mobile device. The Inficolor Smart Module at the heart of the system individually controls up to three zones and is backwards compatible, to work with all Atlantic Color Changing Lighting, past and present, with a simple included adapter.
The number of colors that can be generated by the combination of the 256 levels of red, green and blue are 256 x 256 x 256 = 16,777,216. So in actuality, you have unlimited control of 16.77 million colors with the new Atlantic Lighting System.
To be used with Atlantic Water Gardens Color Changing LED lighting or Colorfalls. Not compatible with Warm White LED lights.
InfiColor Smart Module and App unlock the full potential of color changing lights
Smart Module is wirelessly controlled via InfiColor App, no remote necessary
The three outlets of the InfiColor Smart Module can be synced and linked as a single zone or three zones may be controlled individually
Each outlet can control up to 40 watts of color changing lighting for a total of 120 Watts per InfiColor Smart Module
Upgrade any Atlantic Color Changing Lighting or Color Changing Colorfalls to the InfiColor System using the pigtail adapters included with every Module
Module includes removable weatherproof caps for unused outlets
30 watt solid state transformer is fully weatherproof for worry-free outdoor installations
Add a larger transformer and additional wiring components (not included) to power up to 120 Watts of Color Changing Lighting, 40 Watts per zone
The Bluetooth® InfiColor App makes custom colors, sequences, transitions, timing and daily scheduling of your Atlantic Color Changing Lighting or Color Changing Colorfalls accessible on any Apple or Android mobile device. Best of all, the InfiColor App eliminates the need for a separate remote control!
Select any or all of the three zones to control
Choose any color visually or create a custom color with RGB sliders
Combine and save custom color sequences as Favorites
Assign one of five transitions and adjust the speed of any Favorite
Adjust brightness of sequences and solid colors if desired
The three zones can be independently named and scheduled
InfiColor App available on all Apple or Android devices
Atlantic Water Gardens LED Lighting Color Changing 20 Ft. Extension Cord (CCEXT20)
Extend your Atlantic Water Gardens LED Lights up to 20 ft. with the Atlantic Water Gardens LED Lighting Color Changing 20 Ft. Extension Cord.
To be used with Atlantic Water Gardens Color Changing LED lighting or Colorfalls. Not compatible with Warm White LED lights.
Extension cords allow remote placement of lights where needed most in the landscape, waterscape and hardscape
Atlantic’s extensions feature silicone gaskets and dielectric grease for secure waterproof connections
Color Changing Extension Cords feature one-way keyed connections to eliminate misalignment and water intrusion
Atlantic Water Gardens LED Lighting Color Changing 4-Outlet Block Splitter (CCBSX4)
The Atlantic Water Gardens LED Lighting Color Changing 4-Outlet Block Splitter enables a single transformer to power up to four light fixtures. Includes weatherproof caps.
To be used with Atlantic Water Gardens Color Changing LED lighting or Colorfalls. Not compatible with Warm White LED lights.
Atlantic quick-connect wiring makes connecting multiple fixtures fast and easy
Compact inline 4-outlet block splitters simplify connections and mount on flat surfaces to neaten and organize wiring
All splitters feature removable weather-proof caps for unused outlets
Color changing splitters feature one-way keyed connections to eliminate misalignment and water intrusion
I just wanted to thank you again for the super service. You have quickly made me a repeat customer.
By the way, your web site is a notch above the competition from a user viewpoint. It is very easy (and fast) to navigate and the detail (including hardware specifications) is not typically available anywhere else on the internet.
Doug, Houston, TX
