Danner Pondmaster AP 100 Pond Air Pump (04580)

The Danner Pondmaster AP 100 Pond Air Pump has been designed to satisfy the requirements of a multitude of water related applications. This beautifully designed air pump can be used for oxygenating outdoor ponds and water gardens, de-icing outdoor installations during harsh winters, oxygenating indoor water features and aerating single or multiple aquarium or terrarium tanks.

Key Features

• Energy-efficient
• The Danner Pondmaster AP 100 Pond Air Pump is easy to use
• Powerful hybrid magnetic/direct-drive motor
• Whisper-quiet operation
• High volume with steady air flow
• No lubrication necessary
• The Danner Pondmaster AP 100 Pond Air Pump has a single outlet discharge
• Includes air diffuser

 
Warranty

• 1-year manufacturer’s limited warranty

IMPORTANT

• Watch for possible condensation buildup in the air tubing
• Must be installed a minimum of 12 inches above pond water level to prevent water from flowing back
• DO NOT SUBMERSE AIR PUMP !
• The Danner Pondmaster AP 100 Pond Air Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
• The Danner Pondmaster AP 100 Pond Air Pump is not approved for use in swimming pools or salt water

Specifications

Danner Part Number	04580
Pond Size	up to 10,000 gallons
Pond Depth	up to 9.5 ft.
Maximum Air Flow Rate	5.3 CFM / 8,900 cu.in/min
Pressure	6.53 PSI
Noise Level	45 dba
Submersible	no
Number of Outlets	1
Wattage	100 W
Voltage	120 V / 60 Hz.
Power Cord Length	6 ft.
Air Pump Dimensions
Air Diffuser	(1) multi outlet
Recommended Air Tubing	3/4″, not included

Replacement Parts

If you notice that your air pump is losing air pressure or simply doesn’t work as well as when you purchased it, a simple and inexpensive diaphragm kit is available. After installing the diaphragm kit your Danner Pondmaster AP 100 Pond Air Pump should be as good as new.

Downloads

PDF File: Danner Pondmaster AP Air Pumps Manual