Matala MPV Pond Vacuum
Pond maintenance just got easier. The Matala MPV Pond Vacuum is an affordable, easy-to-use pond vacuum that will help you keep your pond in pristine condition.
Key Features
- The Matala MPV Pond Vacuum can remove dirt particles up to 3/8″ in diameter, such as algae, silt, dead plants and decomposed leaves
- Electronic motor control monitors the filling and emptying of the vacuum basin
- Once the container is full, the motor is automatically turned off
- The collection container automatically empties in about 30 seconds
- The discharged sludge and water can be used on garden beds and shrubs as fertilizer
- Coarse debris is collected in the special mesh bag
- Integrated check valve prevents sludge from returning to the pond
- Wide feet for stability
- 16 ft. long power cord
- The Matala MPV Pond Vacuum includes a variety of nozzles for different debris types, 16 ft. of suction hose, 8 ft. of discharge hose, (5) extension tubes and (1) sludge collection bag
Warranty
- 2-year manufacturer’s limited warranty
IMPORTANT
- The Matala MPV Pond Vacuum must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
- For safety reasons, the Matala MPV Pond Vacuum should be placed a minimum of 7 ft. from the edge of the pond
- DO NOT SUBMERSE !
- The Matala MPV Pond Vacuum is not approved for use in salt water
Specifications
Matala Part Number | MPV |
Wattage | 1,150 W |
Voltage | 120 V, 60 Hz. |
Power Cord Length | 16 ft. |
Pond Vacuum Dimensions | 13″ L x 14.3″ W x 19.2″ H |
Maximum Suction Depth | 5 ft. |
Length of Suction Hose | 16.4 ft. |
Length of Discharge Hose | 8.2 ft. |
Tank Capacity | 20 L |
Drain Time | 25 – 30 seconds |