ShinMaywa 50CRXP2.75S Pond & Waterfall Pump – 10,500 GPH
The ShinMaywa 50CRXP2.75S Pond & Waterfall Pump utilizes the same proven construction and components as the successful Norus series with the addition of an all new, high efficiency, two vane impeller. This unique impeller design produces higher flow rates than the standard Norus vortex impeller, yet still offers the same 1-1/4” solids handling capabilities. For the job that needs a little extra flow, the ShinMaywa 50CRXP2.75S Pond & Waterfall Pump is the answer. High flow rates, high efficiency, high solids handling. Everything you expect from a ShinMaywa pump.
Its ultra long life span, low operating cost, and reliability make the ShinMaywa 50CRXP2.75S Pond & Waterfall Pump the best buy for a homeowner’s water feature.
Key Features
- The ShinMaywa 50CRXP2.75S Pond & Waterfall Pump is made for continuous duty
- 1-1/4” solids handling
- Innovative impeller design
- Efficiency that rivals external pumps
- Cast aluminum bearing housing
- Anti-creep bearing technology
- Non corrosive construction
- Dual mechanical shaft seals
- 32 ft. power cord
- ETL listed
Construction
- Connection – 2” NPT
- Housing – 304 Stainless Steel
- Impeller – PolyAmide & ABS Fiber, Reinforced Resin
- Impeller Type – Two Vane
- Volute – PolyAmide Fiber, Reinforced Resin
- Mechanical Seals Upper – Carbon Ceramic
- Mechanical Seals Lower – Silicon Carbide
- Power Cord – STW PVC
- Fasteners – 304 Stainless Steel
- Shaft – 420 Stainless Steel
- Motor RPM – 3600
- Bearings – Double Ball Bearing
- Insulation Class – Class E
Warranty
- 2-year manufacturer’s limited warranty
IMPORTANT
- The ShinMaywa 50CRXP2.75S Pond & Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The ShinMaywa 50CRXP2.75S Pond & Waterfall Pump is not approved for use in swimming pools or salt water
Specifications
| ShinMaywa Part Number | 50CRXP2.75S |
| HP | 1 |
| Maximum Flow Rate | 10,500 GPH |
| Flow Rate @ 5 Ft. of Head | 10,200GPH |
| Flow Rate @ 10 Ft. of Head | 8,700 GPH |
| Flow Rate @ 15 Ft. of Head | 6,600 GPH |
| Flow Rate @ 20 Ft. of Head | 4,800 GPH |
| Flow Rate @ 25 Ft. of Head | 2,100 GPH |
| Maximum Head | 26 ft. |
| Power Consumption | 1,265 W / 11.0 A |
| Discharge | 2″ FPT (female threaded) 3″ discharge adapter included |
| Power Cord Length | 32 ft. |
| Voltage | 115 V, 60 Hz. |
| Dimensions | 9.3″ W x 18″ H |
| Weight | 18.7 lbs. |
