Sequence 4000 6800SEQ22 Waterfall Pump – 6,840 GPH

The Sequence 4000 6800SEQ22 Waterfall Pump meets today’s increased market demand for performance on all levels. Every Sequence 4000 Model is supplied with 2″ FNPT and Buttress thread ports and unions for ease of use.

Key Features

• Less than half the Watt draw of comparable submersible pumps
• 2″ FPT (female threaded) suction port
• 2″ FPT (female threaded) discharge port
• The Sequence 4000 6800SEQ22 Waterfall Pump is pre-wired with an 8 ft. power cord and molded 115 V plug
• Housing is molded of high strength, glass filled polypropylene
• Quiet operation
• Dry run resistant mechanical seals
• Stainless steel hardware is standard
• TEFC motor for excellent protection
• Aluminum motor for added weather resistance
• Rebuildable, industrial grade motor
• The Sequence 4000 6800SEQ22 Waterfall Pump is suitable for waterfalls and water courses

Warranty

• 3-year manufacturer’s limited warranty
• Special Warranty Information for Sequence Pumps
  Due to the technical nature of these pumps, the pump must be returned and inspected BEFORE the warranty can be honored – we will assist you with the claim but you may be required to ship your pump to the manufacturer for warranty service

IMPORTANT

• DO NOT SUBMERSE !
• The Sequence 4000 6800SEQ22 Waterfall Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
• The Sequence 4000 6800SEQ22 Waterfall Pump is not approved for use in swimming pools or salt water
• The Sequence 4000 6800SEQ22 Waterfall Pump is not a suction pump – a priming pot is required (sold separately)

Specifications

Sequence Part Number	6800SEQ22
HP	1/2
Maximum Flow Rate	6,840 GPH
Maximum Head	22.2 ft.
Power Consumption	376 W / 3.4 A
Suction	2″ FPT (female threaded)
Discharge	2″ FPT (female threaded)
Power Cord Length	8 ft.
Voltage	115 V, 60 Hz.

 

3600SEQ20 = # 4
5000SEQ20 = # 5
5800SEQ21 = # 6
6800SEQ22 = # 7
8200SEQ22 = # 8

Accessory Products

Priming Pot / Basket Strainer 90 C.I. with clear easy-lock lid 2″ FPT / 2″ buttress inlet x 2″ union flange outlet includes adapters to mate with Sequence pumps

High Volume Centrifugal Pump Intake Filter – 3″ (PIF3) Intake screen for high volume applications Allows fine particles through, yet still keeps out large objects such as sticks, fish and weeds Made from epoxy-coated heavy gauge galvanized wire Will not rust or corrode Mesh size is 1/2″ x 1″ Included PVC swing check valve keeps your pump primed 3″ connection Suitable for maximum flow rate of 13,500 GPH Measures 11″ dia. x 30″ L