Tsurumi HS2.4S Pond Cleanout Pump – 3,180 GPH
The Tsurumi HS2.4S Pond Cleanout Pump is designed to pump sand, solids and debris with minimal wear and clogging. It features a built-in shaft mounted agitator that suspends solids while pumping to remove unwanted debris from the pond that would otherwise stay on the bottom.
Not designed to be used as a continuous-duty pond or waterfall pump.
Key Features
- Urethane semi vortex impeller for maximum durability and pump performance
- Dual inside mechanical seal with SiC faces for longer life
- Oil lifter provides lubrication of the seal faces (patented)
- V-ring seal design protects mechanical seal from abrasive particles
- Not designed to be used as a continuous-duty pond or waterfall pump
Warranty
- 2-year manufacturer’s limited warranty
IMPORTANT
- The Tsurumi HS2.4S Pond Cleanout Pump must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet
- The Tsurumi HS2.4S Pond Cleanout Pump is not approved for use in swimming pools or salt water
- Not designed to be used as a continuous-duty pond or waterfall pump
Specifications
| Tsurumi Part Number | HS2.4S |
| Maximum Flow Rate | 3,180 GPH |
| Maximum Head | 39 ft. |
| Continuous Running Water Level | 3.5″ |
| Power Consumption | 5.4 A |
| Discharge | 2″ |
| Power Cord Length | 20 ft. |
| Voltage | 115 V, 60 Hz. |
| Dimensions | 10-1/16″ dia. x 12-15/16″ H |
