Kasco 4400A 1 HP Surface Aerator

Introduce more oxygen faster with the Kasco 4400A 1 HP Surface Aerator. The high-performance design of this aerator uses a single open propeller that creates and pushes water droplets into the air allowing efficient transfer of oxygen to the water. Agitation and movement created by the process spreads the oxygenated water throughout the body of water. The Kasco 4400A 1 HP Surface Aerator can operate in as little as 19 inches of water. It is ideal for ponds/tanks with surface areas of about 1 acre.

The Kasco 4400A 1 HP Surface Aerator does not include a float or bottom screen. For floating units please select from the list below.

Kasco 4400AF 1 HP Surface Aerator – 1 Acre Ponds – WITH Float – WITHOUT Bottom Screen

Kasco 4400AF 1 HP Surface Aerator – 1 Acre Ponds – WITH Float – WITH Bottom Screen

The Kasco 4400A 1 HP Surface Aerator is available in 120 Volt (60 Hz). An optional control panel is also available.

Key Features

• The Kasco 4400A 1 HP Surface Aerator ensures a lower overall operating cost while delivering an extremely high dissolved oxygen level. High-efficiency design means low power consumption and low operating costs.
• Low maintenance and dependable design.
• The Kasco 4400A 1 HP Surface Aerator is manufactured with a hard-face internal mechanical seal for protection against leaks and is flood oil lubricated for excellent heat dissipation.
• The Kasco 4400A 1 HP Surface Aerator features a corrosion resistant, stainless steel design which also makes it extremely dependable in salt water applications or other corrosive environments.
• An easily replaced protective sacrificial zinc anode is included with each unit.
• Safety Tested: ETL listed to UL and CSA Standards.
• The Kasco 4400A 1 HP Surface Aerator increases fish growth and population density while providing efficient water and food circulation with little or no bottom turbulence.
• The Kasco 4400A 1 HP Surface Aerator only requires a 19″ operating depth.
• Choice of Cord Lengths: SJTOW underwater rated power cord length options of 25′, 50′, 100′, 150′, or 200′.
• Made in the U.S.A.

Warranty

• 2-year manufacturer’s limited warranty

IMPORTANT

• The Kasco 4400A 1 HP Surface Aerator does not include a float or bottom screen.
• The Kasco 4400A 1 HP Surface Aerator is not approved for use in swimming pools
• Must be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !

Specifications

Kasco Marine Part Number	4400A
Motor	1 HP
Pond Size	1 acre
Power Consumption	1,356 Watts
Amperage	11.3 Amps
Minimum Water Depth Required	19″
Power Cord Lengths	25 ft., 50 ft., 100 ft., 150 ft. or 200 ft.
Weight	50 to 92 lbs. (depending on power cord length)
Float Included	no
Control Panel Included	no, C25 panel must be ordered separately
Bottom Screen Included	no
Voltage	120 V, 60 Hz.

 

Accessory Products

Kasco C25 Control Panel (C-25) A plug-and-go GFCI protected control panel with 24-hour timer and a photocell controlled outlet for optional lighting. 120V Single Phase 15 Amp

Downloads

PDF File: Kasco AF Series Surface Aerators – Owners & Assembly Manual