Contact Us | Product Catalog | Search | Shipping & Handling | Warranty Service | Pond Planner | Check Out
 
Order Online 24/7 or Call: 1 (604) 637-7763
Monday to Friday 8:00 AM - 4:00 PM Pacific
Outside of those times, please leave a message for a telephone response (usually within 24 hours)
Email Us - 24 to 48 Hours Response Time
All products marked with the FREE SHIPPING icon qualify for FREE GROUND SHIPPING in the 48 States. We will manually remove the shipping charges added by our shopping cart and adjust your order total. ** Our regular shipping & handling charges apply to all other items listed on this page. Please click here for details.
 

External Pumps
PERFORMANCE PRO
Artesian Series Waterfall Pumps
3,210 to 14,160 GPH


 
Artesian Low RPM
Type 10TEFC Pumps
1/8 to 1/2 HP
Artesian High Flo
Type 10ODP Pumps
1/2 to 3 HP
Artesian High Head
Type 10ODP Pumps

1/2 to 3 HP


 
Artesian Series


Oregon


UPS Ground

  • MUST be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter) protected 120 Volt outlet !
  • Pumps supplied without power cord must be hard-wired to a GFCI-protected circuit by a licenced electrician
  • Not for use in swimming pools or salt water
  • DO NOT SUBMERSE !
  • The data in the charts below was compiled using 2” pipe, 10 ft. in length.  If you use larger pipe, or have longer runs, it can increase the time required to prime.
  • The maximum suggested operating height was the greatest height actually tested.  Higher elevations may also work depending on your layout, flow rate and the unit being used, however you would need to do your own testing.

PerformancePro Artesian is the perfect choice for high efficiency and reliability, combined with the convenience of self-priming. Molded of corrosion-resistant polypropylene, Artesian pumps are ideal for applications in which the pump is positioned above the water level. An easy-open Lexan lid provides ready access to the integral strainer pot's large basket.

Available in 1/8 to 1/2 HP @ 1,725 low RPM models and 1/2 to 3 HP @ 3,450 high RPM models.

  • Money-saving high efficiency pump and motor units
  • Designed to operate anywhere on their performance curve
  • Long-life corrosion resistant 316 stainless steel shaft seals
  • Top-of-the-line US motors
  • All 1,725 RPM motors are totally enclosed for excellent protection and long-term reliability
  • Both pump end and motors are designed for quiet operation
  • A 16 AWG, 8 ft. cord with 115 V plug is optional (1,725 RPM models, 1/8 HP to 1/2 HP - please order below)
  • A 12 AWG, 8 ft. cord with 115 V plug is optional (3,450 RPM models, 1/2 HP to 1 HP - please order below)
  • Saltwater kits are available - please order below
  • 1 GPM minimum recommended continous flow rate
  • 3-year manufacturer's limited warranty

Pump Placement

When determining the placement of your Artesian pump, two factors will be influenced by its height above water level. First is its ability to prime. To insure a reasonable prime time, position the pump no higher than the height shown in the "Maximum Recommended Suction Lift" column. Second is its ability to operate without cavitation. To avoid cavitation, position the pump no higher than the height shown in the "Maximum Suggested Operating Height" column.

Artesian Pumps Owner's Manual
Artesian Pumps Manufacturer's Limited Warranty Document

To view these files you need Adobe Acrobat Reader 4.0 or higher. If you do not already have Adobe Acrobat Reader installed on your computer, please click on the Adobe logo to download it free of charge.


 
Artesian Low RPM Type 10TEFC Pumps
A 1/8-30
A 1/8-35
A 1/4-40
A 1/4-49
A 1/3-56
A 1/2-75
HP 1/8 1/8 1/4 1/4 1/3 1/2
RPM 1,725 1,725 1,725 1,725 1,725 1,725
Voltage 115 V, 60 Hz.
230 V, 50 Hz.
115 V, 60 Hz.
230 V, 50 Hz.
115 V, 60 Hz.
230 V, 50 Hz.
115 V, 60 Hz.
230 V, 50 Hz.
115 V, 60 Hz.
230 V, 50 Hz.
115 V, 60 Hz.
230 V, 50 Hz.
Max. GPH 3,210 @ 1' 3,606 @ 2' 4,200 @ 2' 5,220 @ 4' 6,000 @ 4' 7,860 @ 7'
Mid Point Flow 1,605 @ 12' 1,803 @ 13' 2,100 @ 15' 2,610 @ 17' 3,100 @ 19' 3,930 @ 19'
Flow Adjustment no no no no no no
Max. Lift 16 ft. 18 ft. 21 ft. 21 ft. 25 ft. 23 ft.
Max. True Watts @ 115 V 161 W 205 W 270 W 340 W 460 W 630 W
Power Cord  please order below please order below please order below please order below please order below please order below
Discharge Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Intake/Suction Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Recommended Tubing Diameter 2" * 2" * 2" * 3" * 3" * 3" *
 
A 1/8-30
$ 594.98**
A 1/8-35
$ 619.98**
A 1/4-40
$ 644.98**
A 1/4-49
$ 659.98**
A 1/3-56
$ 694.98**
A 1/2-75
$ 739.98**

* All pumps come with a 2" female threaded discharge. 2" high-pressure tubing or pipe will work with all pump models but if volume is important as opposed to high head, we suggest to use a larger diameter pipe. Threaded adapters are required to attach tubing to the pump discharge.
 
Artesian High Flow Type 10ODP Pumps
A 1/2-HF
A 3/4-HF
A 1-HF
A 1 1/2-HF
A 2-HF
A 3-HF
HP 1/2 3/4 1 1-1/2 2 3
RPM 3,450 3,450 3,450 3,450 3,450 3,450
Voltage 115 V, 60 Hz.
230 V, 60 Hz.
115 V, 60 Hz.
230 V, 60 Hz.
115 V, 60 Hz.
230 V, 60 Hz.
230 V, 60 Hz. 230 V, 60 Hz. 230 V, 60 Hz.
Max. GPH 6,780 @ 6' 8,040 @ 8' 10,560 @ 12' 11,940 @ 16' 13,020 @ 18' 14,160 @ 21'
Mid Point Flow 3,390 @ 40' 4,020 @ 44' 5,340 @ 39' 5,670 @ 47' 6,240 @ 48' 6,570 @ 54'
Flow Adjustment no no no no no no
Max Lift 51 ft. 52 ft. 49 ft. 56 ft. 55 ft. 62 ft.
Max. Amps @ 230 V 4.35 5.46 7.15 8.77 9.98 13.1
Power Cord please order below please order below please order below please order below please order below please order below
Discharge Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Intake/Suction Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Recommended Tubing Diameter 3" * 3" * 4" * 4" * 4" * 4" *
 
A 1/2-HF
$ 589.98**
A 3/4-HF
$ 639.98**
A 1-HF
$ 689.98**
A 1 1/2-HF
$ 744.98**
A 2-HF
$ 819.98**
A 3-HF
$ 899.98**

* All pumps come with a 2" female threaded discharge. 2" high-pressure tubing or pipe will work with all pump models but if volume is important as opposed to high head, we suggest to use a larger diameter pipe. Threaded adapters are required to attach tubing to the pump discharge.
 
Artesian High Head Type 10ODP Pumps
A 1/2-HH
A 3/4-HH
A 1-HH
A 1 1/2-HH
A 2-HH
A 3-HH
HP 1/2 3/4 1 1-1/2 2 3
RPM 3,450 3,450 3,450 3,450 3,450 3,450
Voltage 115 V, 60 Hz.
230 V, 60 Hz.
115 V, 60 Hz.
230 V, 60 Hz.
115 V, 60 Hz.
230 V, 60 Hz.
230 V, 60 Hz. 230 V, 60 Hz. 230 V, 60 Hz.
Max. GPH 6,120 @ 5' 6,600 @ 6' 7,680 @ 7' 8,520 @ 9' 9,240 @ 9' 11,160 @ 14'
Mid Point Flow 3,060 @ 44' 3,300 @ 52' 3,840 @ 61' 4,260 @ 67' 4,620 @ 71' 5,580 @ 75'
Flow Adjustment no no no no no no
Max Lift 59 ft. 70 ft. 80 ft. 82 ft. 85 ft. 95 ft.
Max. Amps @ 230 V 4.4 5.6 7.1 8.5 9.7 13
Power Cord please order below please order below please order below please order below please order below please order below
Discharge Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Intake/Suction Size 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT 2" FNPT
Recommended Tubing Diameter 3" * 3" * 3" * 4" * 4" * 4" *
 
A 1/2-HH
$ 589.98**
A 3/4-HH
$ 639.98**
A 1-HH
$ 689.98**
A 1 1/2-HH
$ 744.98**
A 2-HH
$ 819.98**
A 3-HH
$ 899.98**

* All pumps come with a 2" female threaded discharge. 2" high-pressure tubing or pipe will work with all pump models but if volume is important as opposed to high head, we suggest to use a larger diameter pipe. Threaded adapters are required to attach tubing to the pump discharge.

 
PART # DESCRIPTION PRICE
16AWG-8FT Power Cord, 16 AWG, 8 ft. with 115 V plug
fits 1,725 RPM models, 1/8 HP to 1/2 HP
$ 11.98** 
12AWG-8FT Power Cord, 12 AWG, 8 ft. with 115 V plug
fits 3,450 RPM models, 1/2 HP to 1 HP
$ 17.98** 
MPC-10T
ProTect - Taupe
instant protection for your pump and motor
made of UV resistant thermoplastic, insulated with retardent foam for noise abatement
assembly is easy and requires no tools
$ 68.98** 
MPC-10G ProTect - Grey
instant protection for your pump and motor
made of UV resistant thermoplastic, insulated with retardent foam for noise abatement
assembly is easy and requires no tools
$ 68.98** 
SWKIT Saltwater Kit
includes PVC shaft sleeve and Monel w/ SiC seal installed in pump
$ 74.98** 

Tubing

 



What is Verified by VISA ?



Jumping Jet
Rainbow Star
.


.
Parts, parts, and more parts. Please check out our Parts Catalog for replacement filter foams, impellers, volutes. etc. We also stock replacement parts for ultrasonic foggers.

I just received the replacement pump (in just a few days).
PondUSA is fantastic. I have been a customer of yours since I installed a pond 2 years ago and am so impressed with service and now your warranty support. I could not expect anything more from a vendor.
I will continue to use PondUSA for all my pond  supplies.
Thanks Again.
Michael, Massapequa, NY

More Customer Testimonials



CHECK OUT
Online Product Catalog
SEARCH
Click here to search our entire product line by manufacturer or product description.
Contact Us
Returns & Warranties
Order Online
Order by Fax or Mail
Order by Phone
Terms of Sale
Shipping & Handling
Pond of the Month
Customer Testimonials
Pond Planner

Great website. Pond Planner is best in business.
James, Mansfield, LA
Pond Liners &
Accessories
Pond Kits
Pondless Waterfall Kits
     
Pondless Waterfall Components
Pond & Waterfall
Pumps
External Waterfall Pumps
     
.Statuary Pumps
Aeration Pumps
Pond Skimmers
     
Pond Filters
Pond Filtration
Systems
Waterfall Weirs
   
Sheer Descent
Waterfall Weirs
Sheer Descent
Acrylic Waterfall Weirs
with LED Light Strip
UVCs & Magnets
     
Floating Fountains
Fountains &
Fountain Heads
.
Underwater
Lighting
     
Pond Vacuums
AquaMats
Pond Protection &
Winterization
     
Transformers, GFIs &
Power Control Centers
Decoys
Waterfall Foam,
Bulk Filter Media
.
     
Water Treatment
& Pond Test Kits
Barley Straw &
Barley Straw
Extract
Fish Medications & Fish Health
   
 
Fish Nets
Fish & Koi Food
Aquatic Plant Food
     
Tubing &
Hose Adapters
Fitting Center
.
Mosquito Control
     
Islandscapes
Pond Protection
& Predator Control
Floating Critters
     
Stainless Steel Fountains
Brass Spitters
& Decorations
Resin Spitters
     
Resin Fountains
Fountain Reservoirs
Landscape
Lighting
     
Pond Foggers & Parts
Parts
.
 


All prices and specifications are subject to change without prior notice. The information shown on this website is deemed reliable but not guaranteed. Please verify if important.
Contents (C) Copyright 1997-2008 PondUSA.com. All rights reserved.
No parts of this site may be duplicated in whole or in part without express written permission.