PRO ECO
CPF Pressure Filter with UVC
[view
large image]
 |
DO
NOT USE pressurized pond filters in combination with high-pressure waterfall
pumps |
|
Maximum
pump input pressure: 195 in. max. head or 7.3 psi (5.0 meters max. head
or 0.5 bar) |
|
To ensure
maximum circulation through the filter, it is best to keep the hose short
and the pumping height to a minimum, especially on the discharge side of
the filter |
|
Maximum
height difference between filter lid and water outlet: 78 in. (2.0 meters) |
|
UVC MUST
be plugged in to a properly grounded and GFCI (Ground Fault Circuit Interrupter)
protected 120 Volt outlet ! |
|
For safety
reasons, the filter with UV should be placed at least 6.5 feet (2.0 meters)
from the edge of the pond |
|
DO NOT
SUBMERSE ! |
|
This product
will not eliminate blanketweed / string algae |
|
Not for
use in swimming pools or salt water |
|
Ships from Oklahoma |
|
|
The PRO ECO
CPF pressurized pond filters combine outstanding filtration with easy maintenance.
Available in two sizes for decorative ponds up to 2,000 gallons, they are
easily installed, deliver professional performance and come complete with
a 13 Watt UVC. Also included are multi-step inlet and outlet fittings,
an integrated cleaning mechanism for filter sponges, and a UV lamp indicator.
The built-in UVC aids in the control of algae growth without having to
resort to chemical treatments. Maintenance is quick and easy with the built-in
cleaning mechanism.
Filtration
Algae and
dirt are clumped together by the integrated UVC clarifier. The treated
water then flows through the filter unit's filter elements which support
the filtration process and clarify the water. The water then flows back
into the pond.
Cleaning
Cleaning the
CPF filter couldn't be easier. No need to remove the filter lid and deal
with the mess. By simply raising the cleaning lever, the filter elements
are squeezed, expelling the solid waste. Turning the function knob to "Clean"
allows the solids to be flushed from the filter into your garden by the
normal flow of the pump. Then simply turn the function knob back to normal
to resume normal filtering action.
|
Built-in
13 Watt UV clarifier |
|
Five layers
of filter foam in differing sizes and densities provide mechanical and
biological filtration |
|
[view
large image] |
|
Easy cleaning
mechanism - filter foam elements can be cleaned by simply turning the function
knob to "Clean" and pulling up on the cleaning handle - the filter elements
are squeezed, expelling the solid waste |
|
|
|
When cleaning
the filter, a drainage hose can be connected to the cleaning outlet which
diverts the dirty water away from the pond - an extra hosetail is supplied
for this purpose |
|
Filter
clamp for easy opening |
|
Sturdy
construction |
|
Convenient
inlet/outlet hosetails accommodate 3/4", 1", 1-1/4" and 1-1/2" tubing |
|
Built-in
UV lamp indicator |
|
Function
knob to easily switch between normal operation and cleaning |
|
Filter
can be buried in the soil up to the lid |
|
Built-in
temperature monitor automatically switches off the UVC lamp if it overheats
due to a lack of water caused by a defective pump |
|
3-year
manufacturer's limited warranty (1-year warranty on UV bulb and foam pads) |
|
| Contact Us
| Product Catalog
| Search
| Shipping & Handling
| Warranty/Returns
| Pond Planner
| Check
Out
...
...
